After the final review of our EU-funded Learning Layers (LL) project (see my blogs from January and February) I have tried to report on the follow-up activities in North Germany and with our partners in construction sector. In my blogs in March, April and May I have reported on ongoing projects or new initiatives in which the use of Learning Toolbox (LTB) has played an important role. As these blogs have been based on particular meetings or workshops, the picture may have remained somewhat fragmentary. However, this week we have had a series of meetings with different counterparts. This has made it possible to create a group picture of ongoing activities.

Below I will report on the discussions in the three first meetings of this week in which I was present. Here it is worthwhile to note that none of these meetings was focusing only on specific uses of LTB as a dedicated tool for certain uses. Instead, all these meetings were discussing more comprehensive ecosystems of knowledge processes and software solutions (Ökosysteme für Wissensvermittlung und Software-Lösungen). In this context our counterparts were looking for different roles for LTB – as a part of an integrative software ecosystem – in promoting learning, training and workin in construction sector.

1. Bau-ABC Rostrup: New uses for LTB in continuing vocational training (CVT) and projects

In the meeting in Bau-ABC we discussed the prospects of developing an integrative software ecosystem to address course management issues, continuing quality assurance and integration of innovative pedagogic designs to regular training provisions. Here the meeting of Bau-ABC training managers, software developers (including LTB developers) and ITB researchers was partly building on the progress in the project DigiProB (see my previous post). Partly it was building on parallel planning of software solutions for course management and quality assurance. The key point was in the shaping of a software ecology that is linked to traditional data management solutions and receives the ‘mature’ results from development platforms. This would be the case with the DigiProB platform that is being used by lecturers in continuing vocational training (CVT) to create integrated project-based learning designs for CVT participants). In such a software ecology the LTB would serve as the participants interface for accessing digital contents and communication channels in such projects.

Alongside the case of the DigiProB project we discussed parallel possibilities to work further with the Bau-ABC trainers’ group that has been developing more systematic approach to the theme ‘Health and Safety’ (Arbeitssicherheit und Gesundheitsschutz). In a similar way we discussed the possibilities to use LTB to support context-specific language learning of the Spanish apprentices (in the Mobipro-EU project) and key issues preparing them for their workplace-based training at construction sites. For these themes the Bau-ABC participants and the LTB developers presented recently created or modified LTB stacks as means to support learning in these contexts.

2.  Agentur für Nachhaltiges Bauen in Verden: New software ecosystems for construction work

In the meeting at the agency for ecological construction work (Agentur) ITB researchers and LTB developers discussed with Thomas Isselhard on the new working perspectives from their point of view (Verden-based organisations and networks focusing on ecological construction work). As we remember, the LTB-use case in which Thomas demonstrated, how he can use the LTB as means to coordinate the work process at a construction site was well received in the workshop for construction companies in September 2016. Now, based on that basic stack we were looking at newer software solutions and mobile apps that can enhance the usability of LTB by craft trade companies. In this discussion a major role was given for construction process-oriented digital tools (Datenlogger) and for possibilities to develop Building Information Modelling (BIM) solutions from the the perspective of craft trades working together. In this context Gilbert Peffer presented the work of CIMNE with portable BIMtables and BIM screens as means to support knowledge sharing during construction processes. In this discussion we could link to a similar session in our previous meeting with Bau-ABC in which we had had a presentation on BIMtable and on a digital tool package (GreenHouse Koffer) for ecological construction work of carpenters. In our discussion in Verden the key point was that the integration of tools and software should support both construction processes and further maintenance. Therefore, the tools and software solutions should take into account planners, craftsmen and clients as the users. Here it is not possible to go into details but this meeting took further steps in planning of new projects with LTB as a key element in such software ecosystem.

3. Company H.: Rethinking the software ecosystem and promoting the competences of the staff

In the third meeting ITB researchers and LTB developers were discussing with representatives of the company H. In one of my previous blogs I have given a rather detailed picture of a workshop in which we discussed the preliminary findings of a mapping tour that the colleagues had done by visiting different sites of that company. Now in this meeting the colleagues presented a draft report on work flows, support systems, eventual gaps and risk zones and their recommendations. We had a rather detailed discussion – both in terms of situation assessment and possible improvements.

Here it is not relevant to give a detailed picture of the discussion. However, at a more general level it is worthwhile to note that the company representatives were looking at a holistic ecosystem for steering work processes, supporting real-time interaction and reporting as well as enhancing knowledge sharing within the company. From the organisational and pedagogic point it was interesting that the company was interested in the potentials of LTB, both from the perspective of process optimisation as well as enhancing the learning processes of apprentices. Moreover, the company was interested in supporting free spaces for exchanges among the apprentices and for organising events to take up their ideas, concerns and wishes. However, with all these interests the company was looking for improvements that could be implemented with the agreement of the staff and with a perspective to integrate different staff members to common processes.

– – –

I guess this is enough of these meetings. For me this series of discussions was inspiring as I could observe clear steps forward on several fronts. Moreover, this experience gave me a new perspective to ‘digital transformation’. As I now see it, such transformations are not just matters of pushing new technologies upon users (or to substitute a great number of users). Neither can such transformations be characterised as equipping of users with magic tools that radically enhance their powers. Instead, the innovative tools – in order to contribute to digital transformations – have to fit into emerging ecosystems of knowledge processes, steering, sharing and reporting as well as co-design processes in which developers become aware of such requirements. In all these meetings I saw signs of such processes. I am looking forward to observe the next steps.

More blogs to come …

Last Friday (19th of May) I visited a workshop hosted by my ITB colleagues for yet another follow-up activity of our EU-funded Learning Layers (LL) project. This time the German-funded DigiProB project had a workshop on preparing digital tools for continuing vocational training (CVT) in the construction sector. The participants (in addition to my ITB colleagues) were training managers from the training centre Bau-ABC, guest lecturers of their CVT schemes and the software developer supporting the project. I have had several encounters with the DigiProB project but this time I could witness that the participants were making progress in shaping digital tools to support their training activities. But let us first recapitulate what the project is about and what it tries to achieve.

The DigiProB project – Pedagogic challenges for CVT trainers and participants

The aim of the DigiProB project is to support the successive CVT schemes in construction sector (Vorarbeiter, Werkpolier, Geprüfte Polier) with digital tools. In this context the project has to cope with several pedagogic challenges:

a) Limited presence training time: The above mentioned CVT schemes are supported by very short course periods with face-to-face training. Most of the learning has to take place as self-organised learning alongside the work of the participants in construction sector. (These schemes are targeted as upgrading schemes for skilled workers in construction sector and prepare them for management responsibilities at different level.)

b) Subject-based curriculum framework vs. action-oriented learning goals: The main pedagogic challenge for developing the above mentioned CVT schemes was the tension between the subject-based curriculum contents and the action-oriented learning goals. Thus, the presence training is based on subject areas covered by guest lecturers that have been invited as subject specialists (e.g. for construction processes, construction techniques and personal management). Yet, a central role in the curriculum has been given for complex learning tasks and an integrative project report.

c) Providing support for self-organised learning by dispersed part-time lecturers: A further challenge was the fact that the lecturers were recruited individually to cover their subject areas during the course period. Thus, they did not have a collective responsibility on promoting the participants’ learning beyond the course period. Yet, the lecturers were interested in providing further support inasmuch as they possibly could. Therefore, they were interested in working with digital tools for themselves and for their participants.

The DigiProB workshops – finding ways to provide support for integrative projects

During the last few months the DigiProB project has managed to establish a working group of active lecturers who serve as a pioneer group for developing integrative learning projects (and for introducing digital tools to support action-oriented learning in the CVT schemes). This working group has come together on monthly basis and now had its fifth meeting. I had visited their meeting only once – quite some time earlier – so I could now see the progress that the group had made. Below I try to sum up key achievements and working issues of this working group:

1. Working on two tracks to develop digital tools: Already at an early phase the working group took the course to two-track development of digital tools: a developmental platform for lecturers and a user-interface for participants. In this way the group avoided the risk of rushing to a ‘one-size-fits-all’ or ‘one-design-fits-all’ in introducing digital tools. For the moment the group is working primarily with the developmental platform to shape an integrative project that serves as a model for shaping further projects (and complex learning tasks). The shaping of user-interfaces can draw upon the progress with the work with this platform.

2. Shaping a model project to cover a wide range of content areas in an integrative vocational learning environment: Instead of using the developmental platform as a mere collector of training materials for different content areas the group has worked towards more integrative solutions. As a model project the group has chosen the construction of  a motorway service area (Autobahn Raststätte) with different sub-projects (including construction of  a kiosk-building with toilets, construction of special parking bay for trucks and lorries etc.). With such an overarching  theme the lecturers were challenged to incorporate their training contents as contributions to sub-projects of the whole project. Moreover, the real challenges in coordinating such project became transparent in the mutual adjustment of the sub-projects. This led to cross-cutting questions like the following ones: “Can the construction of the kiosk-building be started before the groundwork for the parking bays has been completed?” “Can the building materials for the kiosk-building be stored properly at the construction site when the groundwork is still going on?”

3. Working towards project-related and integrative learning goals: In general the digital learning platforms tend to shape such learning environments with reference to (atomistic) content areas and (atomistic) learning goals. The working group took a course towards project-oriented and integrative learning goals. In this respect the lecturers maintained the curriculum document and its main learning areas (construction techniques, construction processes and personal management) as reference points. Yet, instead of proceeding to a patchwork-like layout of learning units, the group insisted on keeping the projects and sub-projects transparent on the platform. Furthermore, the group insisted on formulating such learning goals that link the above mentioned learning areas to each other.

Interim observations and reflections

I guess this is enough of the main themes of the workshop. In addition, some lecturers presented their own ideas on specific apps (to be found on the learning platform H5P) as support for individual learning. Others introduced ideas for serious games that could be used in the context of these training schemes. Altogether, these ideas envisaged to support the self-organised informal learning of CVT participants (before or after the limited course periods).

Furthermore, the process in the working group reminded me of the Multimedia training schemes that were implemented during the Learning Layers project in Bau-ABC. This working group was going through a similar learning process as the voluntary Bau-ABC trainers in the earlier phase of Multimedia training. However, the Bau-ABC trainers could focus on the project-based learning periods and vocational learning tasks in their trades – and use their blogs as repositories for training materials. They were not challenged to develop integrated projects. For the working group in the DigiProB project it was essential to bring different content areas together in an integrative project – in order to make progress with shaping digital tools for the CVT schemes. Just as it was in the Learning Layers project, it is important that this pioneering group makes progress with the model project – then to be able to share experiences and know-how with other colleagues.

Finally, the process reminds me also of the introduction of the Learning Toolbox in the apprentice training in Bau-ABC (as a user-interface for vocational learners to support work process-oriented learning). Just as in the Learning Layers project,  the shaping of user-interfaces for the CVT participants needs to draw upon the pedagogic idea that are being developed by the DigiProB working group – then to be put into practice in the CVT schemes. From this perspective the earlier work in the shaping of the Learning Toolbox (for the apprentice training) serves as an advanced preparatory phase for the user-interfaces to be developed for the CVT participants.

– – –

I think this is enough of this DigiProB workshop. To me the participation as a visitor was a rich learning experience. And here I mean both regarding the development process of the DigiProB working group (as such) and the general picture of the learning Layers follow-up activities in construction sector (altogether). We (ITB and our partners) are building on the legacy of the Learning Layers project and its construction pilot. And we see new tasks and opportunities coming into picture.

More blogs to come …

Once again I am taking a look at some of the follow-up activities of our EU-funded Learning Layers (LL) project in the construction sector. As I have mentioned in my earlier blogs, my ITB-colleagues and the developers of the Learning Toolbox (LTB) have started cooperation with some German construction companies to launch company-specific pilot activities. In the first phase they agreed to start with feasibility studies. Last week the LTB developers were in Bremen and made some field visits to different sites of our partner organisations with ITB colleagues. At the end of the week we had a wrap-up meeting with one of the companies in ITB (and thus I could attend as an observer).

The approach

In the “Exploitation report” of the LL project we (in ITB) had already outlined our approach to such feasibility studies in the following way:

“Development of a framework for ‘Betriebsbezogene Analysetage’ for identifying company-specific points of intervention (for introducing tools and web resources), working interfaces (for identifying staff involved) and feedback processes (for specifying the benefits of tools etc.) to be supported with Learning Toolbox and affiliated tools and web resources.”

For me the point of interest was to learn, what kind of insights these field visits would bring into discussion regarding

1. the use of digital media and web tools (in general) in the companies and in their trades, in particular
2. as support for organisational and cross-organisational cooperation (specific to their trade) and
3. as means to enhance process optimisation, learning and knowledge sharing across the organisation.

Getting an overview

Our counterpart in this discussion was the medium-sized company H. that is a major regional player in pipeline-building (Rohrleitungsbau) especially supply circuits (Versorgungsleitungen) and service pipes (Hausanschlüsse). It works together with the major electricity providers, water and gas suppliers and telephone and cable providers. Given the wide regional range of activities the company has in addition to its main office several branch offices and installation teams allocated to these offices. The company has framework contracts with its clients that include ordinary orders as well as procedures for emergency repairs. As a result, the company had adopted a ‘federative’ lean organisation that gives a lot of autonomy to the branch offices and to the teams that are working in the region. However, a major constrain for the organisation was to get the reporting of the work of the installation teams (and the clearance of ‘mission completed’) arranged in a smart way.

Given this complexity the LTB developers and my ITB colleagues carried out a series of interviews with the manager and the central IT specialist (in the central office) and with representatives of branch offices and skilled workers at different sites. With reference to the interview grid they then prepared a flow diagram that made transparent the work processes (including working interfaces), information flows (including interfaces with different forms for work orders and reporting) and points of intervention (where use of digital tools and web resources can contribute to process optimisation)

Insights and working issues

In the wrap-up meeting the representatives of the company H. discussed the preliminary findings with the LTB developers and my ITB-colleagues. Here I do not want to get into very specific details but highlight some of the main results:

a) Readiness to use digital media and web technologies: Firstly, already regarding the interaction with client organisations, there is a considerable variety between the ones that use up-to-date digital media (and web technologies) and others that rely on paper-based orders and printed reports. Inside the company the use of digital media and web technologies is generally accepted. Yet, in reporting from the field (with smartphones) there are still some teams that prefer using paper-based reporting.

 b) Multiple dependencies and a variety of digital documents: In this trade (Rohrleitungsbau) it is typical that for one installation job the company has parallel orders from an energy provider, gas provider, water supplier etc.  Typically these organisations use different software solutions, templates and forms. Also, the framework contracts include emergency repairs that need to be started without a separate order – but to be reported with yet another form. As a result the company H. has to deal with several types of digital and analogue documents that are not compatible with each other.

c) Engagement of different parts of the organisation in reporting: The installation works of the company are rather short-cycled ‘projects’ with one or two days’ duration. Yet, given the above mentioned diversity of software solutions and documents (and the varying readiness to use digital tools) there is a tendency towards duplication of reporting work at the construction site and in the office.

d) Autonomy of units/teams and knowledge sharing across the organisation: As has been mentioned, the organisational units at different branch offices – and the teams working in the field – have a great deal of autonomy. Also, their capability to find their own solutions is appreciated. The same is also the case with their way to handle the administrative reporting. However, the management is interested in encouraging knowledge sharing and exchange of experiences across the organisation. Yet, it appears that it is easier to arrange traditional training events (with frontal presentations by external experts) rather than events for shared learning within the organisation. The manager was looking for arrangements to support knowledge sharing among the skilled workers and with focus on improvements in work processes.

Working perspectives and lessons learned

The team of LTB-developers and ITB-colleagues will produce in a short while a brief report with further working perspectives and recommendations. However, already at this stage the flow diagram and the opportunity for joint reflections was appreciated – in the final meeting and during the field visits. Below I make some brief remarks, how (on the basis of the experience with the Learning Layers) the problems can be dealt with and how the organisation needs to engage itself in the next phase:

Concerning the multiple dependencies, different software solutions and document templates there is a possibility to introduce technical solutions – by introducing a company-specific database that communicates with the other kinds of documents (and manages the conversions). This requires some coordination in the central office, whilst the branches and the working teams should get their own documents, which they can at best handle. Furthermore, for the workers in the field it is possible to provide optional choices for reporting via typed documents or scanned documents (that can be converted in the central office). Such solutions would offload the administrative work from the teams and speed up the reporting for the clients. Here the manager emphasised the need to offload skilled workers from unnecessary administrative tasks. To him this would increase the attractiveness of craftsman careers.

Concerning the enhancement of learning and knowledge sharing across the organisation the experience of Learning Layers opens interesting prospects. Firstly, work process-oriented and technology-supported multimedia training can increase the readiness for knowledge sharing. Moreover, linking such training to shaping new stacks for Learning Toolbox can bring into picture practical solutions for such sharing. Here it is important to start from such tools and technologies that offload the participants from unnecessary burdens and make it possible to improve one’s contribution. Here the “Theme Room training” and the co-development of Learning Toolbox in the training centre Bau-ABC can serve as examples.

– – –

I think this is enough of our discussion in the wrap-up meeting. The LTB-developers and my ITB-colleagues will finalise their conclusions and recommendations in a short while. What strikes me in this discussion was the fact that we looked far deeper into learning in organisational contexts (and into process-optimisation in cross-organisational cooperation) than during the LL project. Moreover, it is difficult to find similar cases in the literature that we have been using. So, we have been dealing with an inspiring and challenging case. We hope that we can continue working together.

More blogs to come … 

It just happened so that I had little chance to blog during the April month. Obviously this is due to the fact that I and my colleagues are still in a transition from our EU-funded Learning Layers (LL) project to successor activities. And as I have written in my previous posts, these follow-up activities need quite a lot of time for preparation – they are not merely continuation of the LL activities. I have experienced this in my initiative with the trainers (Lehrwerkmeister) of the training centre Bau-ABC on the theme ‘health and safety’ – it needs more groundwork than I expected. My ITB colleagues have experienced this in the ongoing projects and funding bids with partly new application partners and priority themes. However, we are not through with the key themes of the Learning Layers’ Construction pilot – although we have finished the final reporting quite some time ago. Now, we have a chance to revisit the project experience and draw conceptual and methodological conclusions of our work in the Construction pilot. And I have booked myself in to three conferences to have a closer look at our achievements and how review them from a conceptual point of view. Below I give brief insights into the conference papers that I am preparing at the moment.

The Stockholm International VET conference “Vocational Education and Training – Emerging Issues. Voices from Research” 8. – 9.5. 2017

The series of conferences starts with the traditional Spring conference of Stockholm University – organised on a ferry that cruises from Stockholm to Finland (the Åland island) and back. For this conference I am preparing a paper on the theme “Begleitforschung as mediator between action-oriented learning and digital change: On the role of accompanying research and training interventions in the Learning Layers Construction pilot“.

With this paper I am trying to give picture on our contribution as ‘accompanying researchers’ (Begleitforscher) in the Learning Layers’ Construction pilot – with a special emphasis of the pedagogic development of vocational training when introducing digital media. Here I make comparisons to some earlier cases of accompanying research in German pilot projects (Modellversuche) that focused on vocational schools and emphasised self-organised learning when introducing new curricular framneworks and digital media.

The Rostock International VET Conference Crossing Boundaries in Vocational Education and Training: Social Dimensions and Participation 16. – 18.8. 2017

The next milestone is the second international ‘Crossing Boundaries …’ conference (two years after the first one), now organised by the University of Rostock. For this conference I am preparing a paper on a similar theme: ‘Begleitforschung in the context of digital transformation in vocational education and training (VET): Linking work process knowledge to Industry 4.0’.

With this paper I try to follow the thread that leads from the earlier ‘Humanisation of Work’ (HdA) and ‘Work and Technology’ (AuT) programmes (with pilot projects supported by accompanying research) to present date. Here the German and European research on ‘acquisitition of work process knowledge’ and on ‘social shaping of work, technology  and organisations’ played a major role. Concerning the newer research I will explore some cases of ‘shaping-oriented’ (gestaltungsorientiert) projects that focus on ‘Industry 4.0’ as parallel cases to Learning Layers.

ECER 2017 “Reforming Education and the Imperative of Constant Change: Ambivalent roles of policy and the role of educational research” 21. – 25.8. 2017, Copenhagen

The third milestone is the annual European Conference on Educational Research (ECER) in Copenhagen – directly after the above mentioned conference in Rostock. For this conference I am preparing a paper on yet another similar theme ‘Begleitforschung revisited – Reflections on the role of accompanying research in the Learning Layers project, Construction pilot (2012 -2016)’.

This paper takes a closer look at the in-built methodological tension in accompanying research – what role is to be given on practical support for the developmental activities and what role for conceptual knowledge development beyond the particular case. Here the paper revisits the methodological self -reflection within German Begleitforschung in the 1990s and examines the process of Learning Layers’ Construction pilot with reference to frameworks and distinctions of that time – taking into account the conclusions of the two earlier papers.

– – –

I think this is enough content for a ‘ToDo-List’. Luckily enough, I am already making progress with all of them. However, there is that much reflection and rethinking involved that this work is not mere reporting in the same way as preparing ‘deliverables’ for the review panel. Therefore I am not intending to prepare a series of blogs to cover the papers in the same way as before. Each paper and conference is a case of its own and I need to take time in between. Moreover, with each conference we have different arrangements for publishing and therefore I need to find out what are the policies regarding ‘pre-publishing’ individual papers. But we shall see – time passes quickly and the first conference is already in the coming month. So, I will get back to these papers very soon.

More blogs to come …

In my two previous blogs I referred to the fact that our EU-funded Learning Layers (LL) project had come to an end and that we (the ITB team involved in the construction sector pilot) are working with follow-up activities. I then described briefly, how I came to start a joint initiative on digital media in the area of ‘health and safety’ (Arbeitssicherheit und Gesundheitsschutz) with trainers of the training centre Bau-ABC. In my previous post I sketched the initiative roughly. Now – after our second meeting – I can give more information and I need to reflect on lessons  learned already at this stage.

Looking back – the achievements with the Learning Layers project

Firstly I need to remind myself how this initiative drew upon the achievements of the LL project. During the project some of the trainers had created WordPress blogs to present their training contents (Project instructions, support material and worksheets) to apprentices in their trades. Then, we had piloted the integrative toolset Learning Toolbox (LTB) that had been developed during the project to support learning in the context of work. The trainers had found their ways to create stacks and tiles to support the apprentices’ projects (based on working & learning tasks). However, the transversal learning area ‘health and safety’ had not yet been covered during the project. And – moreover – from the perspective of promoting the use of LTB and digital media in construction sector, this area is important both for training centres and for construction companies. So, we started working together to conquer this terrain.

Mapping learning materials for ‘health safety’ – filling the gaps and reflecting on pedagogy

I had initially thought that we could proceed rather quickly by mapping the existing material that is being used and by analysing some options for learning software – then to start working with appropriate learning designs. But it struck me that I  had not thought of a necessary interim step – pedagogic reflection on the applicability of existing materials for the learning processes of apprentices and skilled workers. When discussing the potentially applicable learning materials the trainers informed me of several gaps to be overcome. Firstly, a lot of the reference materials are lengthy documents with detailed references to norms, standards and regulations. These, obviously, are not very easily usable in action-oriented learning (supported by digital media. Secondly, several checklists and work sheets for risk analysis (Gefährdungsbeurteilung) are designed for real work situations (involving skilled workers). However, for apprentices who are learning and working in the training centre the trainers need to develop adjusted versions. So, therefore, our initiative needed space and time – and digital tools – for such pedagogigic reflection. Furthermore, the trainers saw a possibility to shape an integrative approach that proceeds from general starting points through the main areas of construction know-how (Tiefbau, Hochbau, Ausbau) and special areas (Brunnenbau, Maschinen- und Metalltechnik) to specific trades (carpentry, bricklaying etc.) and to specific work processes (welding, sawing etc.). So, instead of taking this as an easy ‘packaging content to digital media’ exercise, we are in deep discussion on vocational learning and on appropriate ways to introduce digital media and know-how on ‘health and safety’ into working and learning processes.

– – –

I think this is enough for the moment. I have learned a lot and the trainers are pleased to work in this direction. And as far as I am concerned, this kind of process confirms once again the fundamental principles that we applied in the LL project – orientation to ‘work process knowledge’ and to ‘action-oriented learning’. Now I will have a holiday break but I am looking forward to continuing my work with the Bau-ABC trainers.

More blogs to come …

In my previous blog I referred to the fact that our EU-funded Learning Layers (LL) project had come to an end and that the final review has already taken place. For us – the ITB team that had worked in the construction pilot this has meant a change of perspective from developing and testing new digital tools to a phase of adaptation of these tools and setting them to new contexts. In my previous post I mainly focused on the cooperation initiatives with interested construction companies that wanted to test Learning Toolbox (the integrative digital toolset) for their purposes. These initiatives have started from mini-pilots with the option of working into something better. At the same time we wanted continue with the trainers of Bau-ABC Rostrup with a small-scale initiative that helps us to find a way to work further with the use of digital media in construction sector. For this purpose we selected the theme ‘health and safety’ (Arbeitssicherheit und Gesundheitsschutz).

Why this new small-scale initiative?

Looking back at the work of the Learning Layers project in the training centre Bau-ABC Rostrup we need to highlight that the co-design, development and pilot testing of Learning Toolbox (as support for apprentice training) became the core process. It was important to get the toolset ready for use and to find out, how it could at best be used once it had become a viable product. For this purpose it was necessary to focus on a limited number of trades with trainers who had become fit to introduce new tools in their training projects. This all worked, but there were several hurdles that couldn’t be overcome during the active period of the project. Also, the training schemes with digital media (the Theme Room training) couldn’t be continued parallel to the piloting. Finally, after the end of the project some other initiatives regarding the use of digital media came into picture. So, there was a need to see, how the Learning Toolbox could be put into a group picture with other web resources and/or other ways to use digital media.

In addition to the above it is worthwhile to note that the pilot testing of Learning Toolbox focused on apprentice training in selected trades – and on trade-specific projects. To some extent this effect could be bridged with joint projects between two neighbouring trades or by similar learning designs for a group of apprentices moving from its main trade to complementary projects from neighbouring trades. Yet, quite a number of trades remained in an outsider-position. From this point of view it was of interest for several trainers to join in a shared learning exercise that promotes the use of digital media and web resources (including the Learning Toolbox) within the common theme ‘health and safety’.

How are we working with the theme ‘health and safety’?

We have started by collecting (digital) learning materials that are being used for the theme ‘health and safety’ in a shared Dropbox folder and grouping it roughly into several sub-folders. Then we have started to develop a joint Moodle ‘course area’ (shared learning area) with the following ‘courses’ (focal areas):

1. General learning materials (overarching web resources and/or cross-cutting themes)
2. Domain-specific learning materials for the trades represented in the group
3. Learning software options for training/learning in ‘health and safety’
4. Learning designs to be developed with software favoured for specific purposes.

We have started only quite recently, so it is not appropriate to go any deeper at the moment. I will get back as soon as I can give a fresh update. But I can already report that I find the trainers’ engagement very positive and very encouraging. We are making progress in bringing the results of the Learning Layers project further to practice.

More blogs to come … 

As the readers of this blog have observed, most of my posts since November 2012 have dealt with our EU-funded Learning Layers (LL) project. However, now the Learning Layers project has been  completed and the final review has taken place (I blogged on this in January and February). During its active period (2012-2016) the project supported the introduction of digital media, web tools and mobile devices to support workplace learning. Our organisation ITB was in charge of the sectoral pilots in North German construction industry and craft trades. The ITB team worked mainly with the intermediate training centre Bau-ABC Rostrup and with the network for ecological construction work (NNB) in Verden. The main achievement of the construction pilot was the co-design, development and pilot testing of the “Learning Toolbox (LTB)” – an integrative toolset to support learning at work. The key activities and results reported by the ITB team are presented on the final website “Learning Layers Results”. So, now we have been moving on to follow-up activities.

By the end of the project the ITB team had started follow-up projects (funded by the German Federal Ministry of Education BMBF) with focus on training of construction site managers (DigiProB) and self-organised learning of adults in the context of ecological construction work (DieDa). After the Learning Layers the ITB team has also started several mini-pilots (on using the LTB) with interested construction companies and vocational education and training providers.

What have we learned in this transition phase?

Firstly, the transition has meant a step from a long-term project that engaged a Europe-wide consortium to small-scale follow-up initiatives. Secondly, it has meant a change of perspective from developing and testing new digital tools to a phase of adaptation of these tools and setting them to new contexts. Thirdly, it required a change of focus from solutions that could be scalable for wider exploitation to context-specific integration of digital media to company-specific work and business processes.

In this respect the cooperation that my ITB colleagues have been developing with some interested construction companies has been of interest. With one company (specialised in pipeline-building) they have agreed on a mini-pilot that starts with a one-week visit to analyse the needs, challenges and interests that provide the basis for introducing Learning Toolbox (and complementary solutions). With another company (specialised in wood constructions) they have found a possibility to link the Learning Toolbox to a complementary software solution (that focuses on domain-specific work processes). With both cases there is a challenge to bring the newer discussion on Building Information Modelling (BIM) closer to the work processes of skilled workers and construction site managers. And as we know from the pilot activities of Learning Layers, the Learning Toolbox was welcomed by construction professionals and apprentices as an appropriate toolset for learning in the context of work.

So, I wish my colleagues luck with their efforts to run their mini-pilots and to draft funding bids for new project proposals. In the meantime I am working with a parallel initiative with Bau-ABC trainers to promote digital media and web resources (including LTB) in the area of ‘health and safety’ (Arbeitssicherheit und Gesundheitsschutz). But that is already a topic for another blog post.

More blogs to come …

Interesting report in the Jisc email. They say:

“Blended learning (the merging of technology and face-to-face) involves learners in the construction of their own learning. But a recent survey by Sheffield Hallam University showed that there’s inconsistency in learners’ experiences of this – a concern likely shared across the country.

Students also said that they expected the majority of their learning to be supported by an online platform. As a result, Sheffield Hallam University has created a set of “minimum expectations” for their teaching staff to encourage them to publish learning resources online, give online assessment feedback and use social media for student-staff collaboration.”

Without having read the full report from Sheffield, I wonder how much learners on blended learning programmes really are involved in the construction of their own learning and how they are supported in that process. It is also interesting to see the university turning to social media for student staff collaboration. Guess I need to read the report!

In my previous post I started writing about the legacy of our recently completed EU-project Learning Layers and its Construction pilot. With this post I completed on our behalf the homework given by the reviewers of the project to produce a more compressed summary that gives an overview what was tried, achieved and learned in project work. After finishing this overarching ‘legacy document’ I needed to take a more specific look at our achievements in joint project activities with the construction sector training centre Bau-ABC Rostrup. It appeared that our ‘Impact Cases’ on the web were short of the summaries on “Main Impact”. Now that I have completed these texts I found that they should also be presented as a more detailed account of the project work in, with and for a central application partner organisation.

Use of Learning Toolbox (LTB) by Bau-ABC Trainers and Apprentices

The Learning Toolbox grew out of the co-design process of an earlier prototype called Sharing Turbine.  The initial design idea was based on the digitisation of training and learning resources for apprentice projects during their initial training. This design idea evolved during the co-design process into an integrated toolset to provide access to tools and web resources and supports real-time knowledge sharing via mobile devices.

The Learning Toolbox was then developed as an integrative toolset (mobile app container and toolkit) to support learning in the context of work. It was piloted firstly in the North German training centre Bau-ABC Rostrup to support apprentice training in the construction sector. The piloting was based on stacks created by Bau-ABC trainers for short training projects in their trades (carpentry, bricklaying, well-building, metalworking, pipeline-building). The main impacts of the pilots were the following:

• The trainers could shape their training project in a more flexible way. Some trainers developed joint projects for neighbouring trades (to highlight working interfaces). Some developed stacks with common patterns for parallel trades.
• The trainers could make more prominent use of trade-specific online resources (e.g. their own trade-specific blogs).
• The trainers could set their own accents for promoting self-organised learning among the apprentices. Some trainers emphasised problem-solving with a wide range of web resources to be searched. Others emphasised interest- and achievement-based expansion of resources that were made available in the course of learning process.

A more detailed picture of the pedagogic accents in the apprentice training is given in the Scenario document“Learning Toolbox (LTB) as Support for Action-Oriented Learning in the Apprentice Training of Bau-ABC – Instances of Change”.

Multimedia Training for and with Bau-ABC trainers

In the Learning Layers Construction pilot the project organised two Multimedia Training schemes for the training staff of the North German training centre Bau-ABC Rostrup. The first scheme was a generic Multimedia Training to support the trainers’ capability to create their trade-specific digital training and learning environments. The second scheme (the Theme Room Training) was initiated by the trainers to support wider use of digital media and web resources (and of Learning Toolbox) in Bau-ABC. The main impacts of the training schemes were the following:

• As a main result of the first Multimedia training scheme the participating core group of Bau-ABC trainers created their trade-specific blogs (Zimmererblog, Maurerblog, Tiefbaublog, Brunnenbauerblog) that they used as repositories for digital training materials.
• In the preparation of the Theme Room training the members of the core group developed themselves as peer tutors and multimedia trainers for construction sector professionals.
• In the Theme Room training all Bau-ABC trainers developed their capability to use social media, digital learning contents and digital learning tools.
• In the transition to piloting with the Learning Toolbox the members of the core group made focused use of digital learning tools (e.g. GoConqr) in their trade-specific stacks.

A more detailed insight into the Multimedia Training schemes is provided by the Methodology document “Training Interventions as Capacity-Building for Digital Transformation in Vocational Education and Training”.

– – –

I think that these short summaries (with pictures) give an overview what we achieved together in our project activities in the construction sector training centre Bau-ABC Rostrup. Based on this legacy we can work with further initiatives.

More blogs to come …

During the last four years (2012-2016) I have mainly been writing on our ‘ongoing EU-project Learning Layers’. And during the last few weeks (since November 2016) I have been writing on the final reporting of the project. My latest series of posts was about the Final Review Meeting in January 2017 in Verden. Someone might think that I have said everything that there is to be said about the completed project. Yet, I do not share that view. As a matter of fact our reviewers challenges us to do some more homework. They asked us to prepare more compressed summaries (on the work packages) on what we tried to do, what we achieved and what we learned during the project. And they asked us to link the web documents on our ‘final deliverable’ website results.learning-layers.eu. Also, the reviewers asked us to present some self-critical reflections on things that we could have done otherwise. (In my latest post I started thinking loud, what kind of answers we can give.)

Now that I have done my part of this extra homework I find it useful to present this ‘nutshell picture’ as a blog under the heading ‘Legacy of “Learning Layers” Construction Pilot”. I think that the following paragraphs give a genuine picture of what we tried to do and what we achieved – and what we learned in the Construction Pilot of the Learning Layers project.

Co-design approach and process dynamics

In the construction pilot the leading initiative in co-design work was started with the design idea of digitising training and learning materials in the training centre Bau-ABC (“Sharing Turbine”). This initiative was perceived as a key step to digitise vocational education, training and learning processes across the apprentice training in construction sector. In several iterations this design idea was transformed into the shaping of an integrative toolset (mobile app) that provides access to web resources, project documents and work- and learning-related contacts (“Learning Toolbox”). This process was shaped as a strongly user-oriented R&D dialogue that involved construction sector trainers (from Bau-ABC), technical partners (RayCom, CIMNE, Pontydysgu) and accompanying researchers (ITB).

References: The dynamics of the process and the contributions of different parties have been reported in the Methodology document “Accompanying Research and Participative Design in the Pilot Activities with the Learning Toolbox (LTB)”.

Capacity-building and training model

In the construction pilot the initial interviews brought into picture a scattered landscape of separate digital tools and apps that were not considered appropriate as support for work-related learning. Alongside co-design workshops the project organised a generic Multimedia Training Scheme to support the Bau-ABC trainers’ capability to create their trade-specific digital training and learning environments. The key results of this phase were the trainers’ blogs (Zimmererblog, Maurerblog, Tiefbaublog, Brunnenbauerblog) that they used as their trade-specific repositories for digital training materials. Later on, a broader and more construction-focused training model – the Theme Room Training – was initiated by the trainers to support the use of digital media and web resources (and of Learning Toolbox) in Bau-ABC. The Theme Room Training was implemented in 2015 by the project team and it engaged all training staff of Bau-ABC.

References: The development of the capacity-building approach and training activities has been reported in the Methodology document “Training Interventions as Capacity-Building for Digital Transformation in Vocational Education and Training”. The impact has been presented in the Impact Case “Multimedia Training for and with Bau-ABC Trainers”.

A detailed report on the planning and implementation of the Theme Room Training is provided in the Master Thesis of Jaanika Hirv for the Tallinn University:

Hirv, J. (2016). Digital Transformation: Learning Practices and Organisational Change in a Regional VET Centre. Master’s thesis, TLU.

A detailed documentation on the development of the training schemes and a digital archive of the training materials is provided in the moodle-application ITB-Moodle. The “Theme Room Training 2015”.

Piloting with Learning Toolbox and peer tutoring

As a result of the co-design and tool development work in the construction pilot the Learning Toolbox was introduced in Bau-ABC to be used in their apprentice training in selected trades. For this purpose the responsible trainers created their own stacks for the respective training projects. When the apprentices moved to training periods in neighbouring trades, the trainers created further stacks for these projects. The following trades were covered: well-building (Brunnenbau), metalworking (Metalltechnik), pipeline-building (Rohrleitungsbau), carpentry (Zimmerer), bricklaying and masonry (Maurerwerk). Trainers of carpenters and bricklayers decided to create stacks for a joint project the draws attention to a working interface of the two trades. In addition, the shop steward for health and safety (Sicherheitsbeauftragte) started to develop a specific stack for training in this field.

References: The measures to introduce the Learning Toolbox into apprentice training in Bau-ABC and the immediate impact have been reported in the Impact Case “Use of Learning Toolbox by Bau-ABC Trainers and Apprentices”.

Insights into pedagogic approaches of trainers and learning behaviour of apprentices are provided in the Scenario document “Learning Toolbox (LTB) as Support for Action-Oriented Learning in Vocational Education and Training (VET)”.

Outreach activities and engagement of further users

Alongside the co-design and pilot testing activities the construction pilot has organised outreach activities to engage further users of the Learning Toolbox. Most of these contacts have led to very focused trade- and company-specific negotiations. A generic use case has been documented on the basis of Thomas Isselhard’s work as a construction site manager in Verden. Based on a workshop for craft trade companies (and on the presentation of Thomas Isselhard) the construction pilot outlined a scenario for craft trade companies and their collaboration with planners, authorities and parallel trades.

References: The model of using Learning Toolbox to coordinate the work of planners and different craft trade teams has been presented in the Scenarios and Models document “Learning Toolbox as Support for Organisational Learning and Cooperation at a Construction Site in Verden – Instances of Change”.

The presentation of Thomas Isselhard’s has been recorded on two videos:

Video 1: LTB at Use on Construction Site in Verden – Thomas Isselhard’s Presentation

Video 2: LTB at Use by Companies – Discussion after Thomas Isselhard’s Presentation

Lessons learned

Concerning the strategic choices regarding co-design processes (to develop new tools to be tested and deployed during the project) vs. diffusion processes (to select existing mature tools to be piloted as a alternative or complementary action) the construction pilot team has concluded:

1. The needs and expectations of the application partners could only have been met via participative co-design processes. Likewise, the capacity-building measures alongside the co-design were crucial to equip construction sector users with necessary digital competences.
2. The co-design approach (to develop a flexible and integrative toolset “Learning Toolbox”) would have enabled earlier piloting with existing multimedia tools (to be integrated to the Learning Toolbox). Such complementary piloting in Bau-ABC would have been useful in the intermediate period between the two training schemes and as a preparation for the introduction of the Learning Toolbox.
3. Complementary piloting with existing tools (alongside co-design of Learning Toolbox) could have been used as bridging measures to involve interested construction companies in pilot activities. Now the engagement of companies started only when the Learning Toolbox was ready for piloting.

– – –

I think this is enough of the general picture of Construction pilot and of the legacy of the intensive project years 2012-2016. However, in this context I have had a special chance to review the cooperation of our project team with our application partner organisation Bau-ABC Rostrup and the impact of our activities. I will focus on this in my next post.

More blogs to come …