With my previous post I started to blog on the third transnational project meeting of our EU-funded project TACCLE4-CPD that took place in Pontypridd, Wales. This project is working with frameworks, pedagogic concepts and arrangements for continuing professional development (CPD) of teachers and trainers in promoting their digital competences. It builds upon the achievements of three previous TACCLE projects that worked directly with teachers and provided support for promoting their digital competences. The fourth project has the task to support training providers and managers in shaping adequate arrangements for CPD in different educational sectors and enhancing appropriate digital competences.

In my previous post I gave a picture, how we revisited the key idea of this project and in what respect we have to face different challenges than the earlier TACCLE projects. The main difference is that we have to support policy-developers, educational managers and training providers – not immediately acting teachers and trainers. This has consequences for the policy analyses and frameworks to be developed in the project – as well as for our approach to collecting Open Educational Resources (OER). In general, we reached a common conclusion on giving a central role for our work with a Mindmap as an integrative tool. However, as I see it, this provided further challenges, how to link my contributions to this approach.

Linking the sector of vocational education and training (VET) to the work of TACCLE projects

In this context it is worthwhile to remind that the TACCLE projects have so far focused on general education (and general adult education). Thus, the emphasis has been on school-based education and classroom teaching. In this respect the field of vocational education and training (VET) with different institutional settings and with different interfaces between education and working life has not been present. As a contrast, our institute (ITB) had recently worked in a major EU-funded project Learning Layers in which we worked together with construction sector and with a training provider for work process -oriented learning. As a contribution to this project we had organised two campaigns for training of trainers to enhance their digital competences. In the proposal for the TACCLE4-CPD project this background had been highlighted as a major asset of our institute ITB in the current project.

However, when the TACCLE4-CPD project started working, it became clear to me that I have to provide insights into the legacy of the Learning Layers project and what needs to be considered when discussing CPD policies and measures in the field of VET. Also, I noticed that there is a need to provide insights into the institutional complexity of the German VET system – in order to grasp the role of different policy levels and R&D programmes. In this respect I felt that we from ITB had to work ourselves in into the TACCLE4-CPD projects and that we had to open new perspectives for the project work. Below I illustrate this process with three key themes.

Critical analyses of policies for promoting digital competences in the field of VET

Already in an earlier blog I had addressed the institutional complexity of the German VET system – with reference to the federal governance model and the dual system of VET (based on workplace-based training supported by school-based education). Taking into account the diversified power structures on education and training it is possible to understand the relevance of R&D projects and of specific sectoral partnerships. Therefore, I had produced for our November meeting a report that firstly gave a brief overview on the governance structures in education and training in Germany. Then I presented an overview of selected R&D projects that have a relevance for promoting digital competences and in shaping patterns of CPD. Thirdly, I included some interviews from actors in the field to highlight, what kind of impact different policies and initiatives have at the local level.

When I presented this contribution, I realised that it was written in the old way as a national report. In the light of our discussion on the critical analysis of policies I needed to transform the perspective to a general approach to the field of VET. Then I needed to outline different systemic models and levels of policies – after which the German governance structures could be given as examples. In a similar way the level of R&D programmes should be outlined with some main themes – under which the selected cases should be given as illustrative examples. Finally, the engagement of actors in the field should be discussed in the light of lead initiatives and by presenting modes of participation. In this way the report would provide (to some extent) an introduction to the VET section in the MindMap and should also address, how the MindMap can be used.

Exploring the project histories of TACCLE projects and of Learning Layers

As a second contribution I had prepared a discussion paper that compared the project histories of the three earlier TACCLE projects and that of the Learning Layers (LL) project (with focus on the Construction pilot). In both project histories I noticed similar phases of search, reorientation and enrichment and encountering new challenges. From the perspective of LL project experience I emphasised the central role of Learning Toolbox (LTB) as an integrative toolset for supporting vocational and workplace-based learning. From this perspective there is a slight tension vis-à-vis the former TACCLE projects that focused on general school education and emphasised the role of teachers’ handbooks.

When discussing this contribution I realised that I had not been able to reach the perspective of TACCLE4-CPD. Here, in addition to the work with the MindMap, it is worthwhile to take a look at the DigCompEdu framework as a bridging approach. Based on this framework it is possible to see the legacy of the LL project (including the co-design process, the training campaigns and the introduction of the LTB) as a systematic effort to link occupational competences, pedagogic competences and learners’ competences to each other. Here, the LTB served as a toolset that was shaped to support such integrative processes. From this perspective I needed to rework the paper to emphasise this approach and to avoid an impression that I would only be pushing the tool as such.

Reflections on different training models for promoting digital competences

A further important theme that we discussed was comparison of different training models. We noticed a general trend towards divisive grouping of training models as abstract lists. In our discussion we found it more appropriate to reinterpret such ‘models’ as ‘characteristics’ and to look, how different characteristics can be combined in holistic training concepts. From this perspective the “Theme Room” training that was used in the LL project would serve as an interesting case. In particular the prospect of further development of this concept – including the use of LTB during the training and after it – is an interesting challenge.

—

I guess this is enough of these points. To some extent this brief report may appear as insider-discussion – given that the MindMap is not yet there as an illustration. However, to me it was important to write down my interim conclusions for further work in the project.

More blogs to come …

The third European Vocational Skills Week (EVSW) took place this week in Vienna (Wien). The event has been launched by the European Commission to draw attention to the importance of vocational education and training (VET) for education, economy and society. Our European VETNET network has also played a role in drawing attention to the contribution of VET research to the development of VET. However, due to several intervening factors I have not been able to attend to these events. Yet, this time I was somewhat more engaged in the preparation and followed more keenly the news from Vienna.

The competition for European VET Excellence Awards 2018

As usual, during the EVSW, there was also this year the competition for European VET Excellence Awards for different kinds of contributions to the development of VET. In the category “European VET Research Excellence” the jury had nominated two European research projects for the final competition:

• The Learning Layers (LL) project that carried out a complex Europe-wide R&D project for studying the use of digital tools, web resources and mobile technologies to support learning in the context of work. The project engaged application partners in healthcare sector (UK) and construction sector (Germany) in co-design, pilot testing and actual use of new tools. In the competition the project was represented by the scientific coordinator Tobias Ley from Tallinn University.
• The Modelling Vocational Excellence (MoVE) project is a transnational project that has studied World Skills competitions at the national, European and wider international contexts. The aim of the project is to draw conclusions from competition processes for the development of everyday life practice in the field of VET. This project was represented by the scientific coordinator Petri Nokelainen from Tampere University.

After the nomination the finalists were presented on a special website for public voting that took place during the last weeks before the event and during the first two days. On the evening before the closing ceremony the finalists in different catergories had the opportunity to give short pitches to make their case. Then, in the closing ceremony the nominees of each category were invited and the winner was declared. Concerning the award for VET Research Excellence I was pleased to see a video recording and to hear the words: “The award goes to … Learning Layers”. As fair competitors Petri and Tobias congratulated each other. And then Commissioner Marianne Thyssen handed the award to Tobias Ley.

Celebrating the award winner Learning Layers

Firstly, let us do justice to both finalists – the two international projects and the teams involved – and for the fair competition. This was a good way to present European and international VET research at such an event.

Then, coming to our Learning Layers project: Why are we so happy that we got the award fror European research in the field of VET (vocational education and training)? Here I am speaking in particular for the partners of the Construction pilot – research partners, technical partners and application partners from the construction sector. I would like to raise the following arguments for us as award winners:

1. A substantial part of Learning Layers pilot activities were carried out in the context of apprentice training for construction sector in North Germany. In this context the project was developing a digital toolset “Learning Toolbox” to support work process-oriented learning. Now, in the initial pilot context – the training centre Bau-ABC – the Learning Toolbox will be introduced to the training of all occupations.
2. The co-design and tools deployment processes were carried out as participative Research & Development dialogue. In this dialogue practitioners, technical partners were developing tools that promote a culture of self-organised learning in different craft trades.
3. The project organised training of trainers in such a way that they could act as promoters of innovation and adjust the use of tools to match their pedagogic priorities (self-organised search of knowledge within a wide set of resources vs. gradual extension of resources that are available for learner). The ‘theme room’ approach is being used in the further promotion of the tools by other trainers.
4. After the end of the Learning Layers project there have been several follow-up initiatives to spread the use of Learning Toolbox to support practice-based learning in Vocational and Higher Education (e.g. in Estonia and Spain). These pilots have involved also other sectors (e.g. education/training in healthcare and media occupations).
5. A major spin-off arising from the Learning Layers is the use of Learning Toolbox as support for ePosters in conferences. This was started in the conferences for medical and dental education (AMEE, ADEE) and in the conference for technology-enhanced learning (ECTEL). Most recently the ePosters were piloted in the European Conference on Educational Research (ECER) in the network for research in vocational education and training (VETNET).

The points above make it clear that the Learning Layers project was not merely a theory-driven or a tool-driven project. Instead, the project took a high risk in launching open-ended co-design processes and was very much dependent on the cooperation with practitioners in the pilot sectors. Moreover, the tools that were developed in the project – notably the Learning Toolbox – reached the stage of viable products. But in order to bring them further as tools for regular use, additional efforts were needed by the tool developers, practitioners and supporting researchers. These efforts have pointed out to be successful and it was fortunate that reports on recent success were communicated in the event. Thus, the award was a recognition of all the work that contributed to our success. Now we can celebrate, next week we have to take further steps in our work.

More blogs to come …

Last week I returned from my long sick leave. And I had immediately the possibility to attend a working meeting at the training centre Bau-ABC Rostrup. With this training centre we had worked in the EU-funded Learning Layers project many years to develop digital tools to support work process -oriented learning. During the project we reached the stage that Learning Toolbox (LTB) was ready as a viable product to support training and learning processes. The pilot testing in the final phase of the project proved that trainers and apprentices can use the toolset in their training processes. Yet, there were several practical issues that slowed down a wider use of the LTB. Thus, the trainers that had been involved in the pilot testing kept on using the toolset but a wider use was delayed.

Now, in our meeting last week we were facing a new situation. In the meantime most of the hurdles had been overcome and there was full confidence among all parties involved that LTB can be introduced in the apprentice training of Bau-ABC for all trades, Now the pioneering trainers, the management/administration representatives and the LTB developers were discussing, how to support a full-scale implementation of the toolset. From this perspective there was a need to harmonise the use of LTB stacks across the trades and to ensure effective ICT support. Secondly, there was a need to create awareness of good practice in different trades and to share experiences across the trades. In this context the presence of us – researchers from the research institute ITB – was relevant, since we are working in TACCLE projects that support training of trainers and we can draw upon the work in Bau-ABC.

Insights into the uses of LTB to support training in different trades

Here it is not possible to give a complete overview of all the examples that were presented by Bau-ABC trainers representing different trades. Below, I have selected exemplary cases that show, how the use of LTB had been incorporated into the the work process -oriented learning projects of Bau-ABC apprentices:

1. Pipeline-builders (Rohrleitungebauer) were using LTB to draft joint plans, how prepare the grounds for the pipelines. Instead of just doing the spadework individually, they made their plans as teams – they divided the tasks and allocated responsibilities for controlling.
2. Road-builders (Strassenbauer) had prepared a comprehensive overview of the machines provided by the company W&N with nutshell versions of users’ guides (based on the original materials).
3. Tilers (Fliesenleger) had prepared a comprehensive overview of technical tools that were used in their trade with links to the instructions provided by the manufacturers.
4. Construction plant operators (Baugeräteführer) had prepared electronic forms as checklists for the inspection of the vehicles before starting to use them. Only after completion of the form and reporting that the vehicles were in order the operators got clearance to start working.
5. Carpenters (Zimmerer) had been working in a joint project “WorkCamp GreenHouse” with other training centres in Germany. In the project they had developed several modules for ecological construction work (focusing on their trade and the use of materials). In this project they had used LTB as a common toolset and developed a common project plan structure to guide the creation of mother stacks and daughter stacks.
6. In the area “Health and Safety” (Arbeitssicherheit und Gesundheitsschutz) trainers from different trade had worked together to shape a common stack structure that presents the overarching regulations and the local instructions in the training centre. Within this structure different trades had the possibility to present trade-specific content (e.g. concerning their trade-specific personal safety outfits).
7. In all trades the apprentices (Auszubildende) were using the LTB to upload photos as progress reports on their work and learning in the projects. The trainers used specific background colours for the tiles that documented apprentices’ work.

The relevance of the recent progress for apprentice training and vocational learning

If the points that I have listed above are taken only as separate inputs with dedicated tools, it would not appear very “revolutionary”. But the essence of the recent progress is that the trainers are working with an integrative digital toolset – the LTB. They have already used LTB for giving instructions and worksheets for apprentices’ projects. Now, with these newer features the range of using LTB in working and learning contexts is expanding. And – as already mentioned – the trainers are themselves leading the innovation and sharing experience with each other. Moreover, for the apprentices the use of LTB is not just a matter of receiving instructions and reporting of the completion of their tasks. As we have seen it from the examples, the use of LTB requires from them a holistic view on their projects and a professional attitude to completion of the tasks. This has been the spirit of working with the LTB in Bau-ABC.

Now, at this stage we were happy to see that Bau-ABC is organising the wider use of the LTB independently of externally funded projects and within its own organisational frameworks – in collaboration with the LTB developers. And, moreover, Bau-ABC is looking for ways to spread the use of LTB across its professional networks. As we see it, the work of the Learning Layers project bears fruit! We – as accompanying researchers – are happy to observe this also in the future.

More blogs to come …

In my previous post I started to report on our activities at the European Conference of Educational Research (ECER 2018) that took place last week in Bolzano/Bozen. In the first post I concentrated on the sessions that focused on the use of Learning Toolbox (LTB) as a digital toolset for preparing and presenting ePosters in conferences. In this second post I will concentrate on my own contributions that focus on the follow-up phase of our EU-funded Learning Layers (LL) project and on the issue ‘transfer of innovation’ after such a project.  Firstly I will discuss my presentation on the research background of the LTB – prepared for the EERA session on using the LTB for ePosters. Secondly I will discuss my paper presentation on the theme “Transfer of Innovation after the Learning Layers project”.

However, this time I don’t want to provide simple summaries of two presentations. After all, we were at #ECER2018 with a pilot project in which the poster authors were trained to convert their traditional posters into ePosters with the help of LTB. So, I also took our own medicine and transformed my ‘ordinary’ PowerPoint presentations into hybrid presentations by using the LTB. Therefore, I want to give insights into the ePoster-versions of my presentations and what all has been packed into them alongside the initial PowerPoint presentations. Let me firstly give the link to the EERA showcase, where they can be found among others. Then we can have a look at each of the two presentations individually.

The research background and the  research-related potential of the Learning Toolbox

Mini-Poster  “Research background of Learning Toolbox (LTB)”

The ‘ordinary’ ppt-presentation gives insights into the Learning Layers project, into the co-design activities in the Construction pilot, into the shaping and pilot testing of the Learning Toolbox (LTB) and into the reporting of the results. Then, the presentation gives an overview of research themes with which I have tried to put the innovation agenda into a wider context. And I have added a lot of references to relevant literature.

In my ‘ePoster-version‘ I have prepared an LTB-stack and told my story with few tiles that accommodate text documents. In addition I have used other tiles to link to web documents for presenting our project documentation and reporting. Then, on further screens I have given access to my research papers and to videos presenting our application partners’ views. In this way the ePoster-version provides a richer resource environment on the background of the LTB.

The ‘transfer of innovation’ issue before, during and after the Learning Layers project

Mini-poster “Transfer of Innovation after Learning Layers”

Here, the ‘ordinary’ ppt-presentation gives some background information on the Learning Layers projects, on the co-design and pilot activities in the Construction pilot and describes the transition to the follow-up phase. Then, the second part discusses the ‘transfer issue’ as it was analysed in the light of earlier German Modellversuche, in more recent innovation programs and in specific pilots to promote transfer via ‘encounters’ and joint search processes. The presentation makes some comparisons between these earlier examples and our present situation. And here again, we have some literature.

In my ‘e-poster version‘ I have prepared a simple LTB-stack with two screens. The home screen gives access to the ppt-presentation and to the full paper and to my author information. The additional resource screen gives access to essential web links: the reports on Learning Layers results, the documentation of the Construction pilot as the “LTB-Chronicle”, the EERA-showcase with other ePosters. And concerning the literature, it provides two content tiles – literature on the transfer issue in Modellversuche (only paper-based) and my research papers uploaded on ResearchGate. In this way the ePoster-version has provided a somewhat richer resource environment.

—

I think this is enough of my contributions. I hope that this blog post helps to get access to the ePosters and to the resources they make available. If that is the case, it was worthwhile preparing them. But this is not all about the #ECER2018.

More blogs to come …

As usual, I have also this year participated in the European Conference on Educational Research (ECER). This year the conference was organised in Bolzano-Bozen – in the bilingual South-Tyrolean area next to the Dolomites. But for me and my colleagues this was not at all a touristic mission. In addition to the ordinary conference program we were in charge of the pilot activities with ePosters powered by the Learning Toolbox (LTB). In my previous post I have reported on our preparatory activities. Now it is time to report, how we put it all into practice and what kind of experiences we made. Below I give first insights into the Interactive ePoster session of the VETNET network (European Vocational Education and Training Research Network). Then I report on the EERA special session for discussing the use of the new toolset – the LTB – for preparing ePosters in a wider context.

The Interactive Poster Session of VETNET with ePosters presented in a session room

As I have reported in my previous post, we had invited all authors who had proposed posters to be presented in the VETNET (Network 2) program of the ECER 2018 to prepare ePosters and to present them in an Interactive Poster Session in the VETNET area. We were pleased that all authors had agreed and that we had their ePosters ready in the EERA showcase prepared by the LTB developers. However, we had very little advance information on the venue and very little time to prepare the room for the session. Thus, the best we could do was to organise a similar session as an ‘ordinary’ paper session – but now presenting ePosters. A major difference, however, was the fact that we had a full set of mini-posters presented on ‘poster wall’ in the session room before the session and it remained after the session.

Mini-posters for the VETNET ePoster session at ECER 2018

We had an additional difficulty in the fact that the EERA session was scheduled immediately after the ePoster session, so we had to organise the presentation and discussion on six posters in a tight time frame to get in time to our next session. For this purpose we grouped the presentations into pairs that had some commonality in their themes. Here again, our authors were flexible and the arrangement suited them.

Firstly. Wilko Reichwein presented insights into the cross-university cooperation in shaping vocational teacher education by linking subject disciplines and pedagogic know-how to each other. Then Marta Virgós Sánchez provided insights into the implementation of ‘dual’ training models in Spain. Cooperation between learning venues (Lernortkooperation) was discussed from the perspective of educational planning (the German presentation) and from the perspective of feedback from the parties involved (the Spanish presentation).

Secondly, on behalf of a Hungarian research team Marta Takacs Miklósi and Attila Karoly Molnar presented their comparative studies between the preconditions for education, training and learning in the prisons in Hungary and Poland. Then they presented insights into the learning opportunities and the role of andragogy (adult-oriented support for learning) in Hungary and Slovakia.

Thirdly, Maria Christidis gave insights into the communication culture and learning culture within the training of nurse assistants in Sweden. Then Katharina Peinemann provided insights into the inclusion issues in the German pre-vocational learning provisions (the ‘transitional system’ ) and into challenges for teachers’ professional development.

Altogether, we suffered from the time constraints, but we could stimulate some discussion. And since the authors could stay a little longer at the ‘poster wall’, they could advise interested participants, how to upload the richer LTB stacks (with the help of the QR-code) to mobile phones and get further information.

The special EERA session “Using Learning Toolbox for presenting Educational Research”

Our next session – the EERA-wide event to inform participants from other networks on the ePosters and the LTB – had been proposed and planned before we knew how successful we would be with the VETNET session. Therefore, we had planned firstly a presentation that gives a report on the development of the LTB in the Learning Layers (LL) project. This was prepared by me. (I will get back to this input in my next post.)

How to start with ePosters – extract from Gilbert’s presentation

The main input for this session was prepared by Gilbert Peffer on behalf of the LTB-developers. He gave insights into the functioning of the LTB, on the process of preparing and presenting ePosters and on possible uses of ePosters at different conference venues. Also, he presented newer ideas for developing ePoster sessions, e.g. the ePoster Arena. (This includes a central podium for presenting several short pitches and then distributed round tables for discussions with presenters.)

New engagement formats – extract from Gilbert’s presentation

In the discussion we had feedback from the authors of the VETNET ePoster session and further questions from representatives of other networks. Also, we got several questions concerning the use of LTB as support for practice-based learning in vocational and higher education. We still have a lot of impressions to digest and a lot of points to be made to EERA as conclusions on our pilot project.

—

I guess this is enough of this pilot project. But I will keep the topic ‘ePosters’ present when I give an account on my own presentations. I also did my homework in preparing ePosters although I presented in somewhat different sessions.

More blogs to come …

One of the most successful spin-offs from our EU-funded Learning Layers (LL) project has been the use of the Learning Toolbox (LTB) in conferences to prepare ePosters. As regular readers of this blog know, I have covered the work of the project and its construction pilot since 2012. And in the recent years (during final phase of the project and in the follow-up phase) I have written a lot of the flexible mobile toolset that was named “Learning Toolbox( LTB)” since it was designed to support vocational and workplace learning in the construction sector. BUT one of its most interesting applications has been the preparation of ePosters as an alternative for traditional paper posters. And, as I have written (somewhat enviously), our colleagues have been successful in introducing it to conferences of medical educators (AMEE), dentist educators (ADEE) and educational technologists (EC-TEL). However, now it is the time to announce that LTB will be introduced into our field – to the European Conference on Educational Research (ECER) in the annual conference of the European Educational Research Association (EERA) that will take place in September 2018 in Bolzano/Bozen in Italy. Below I will give a brief report how this has come into being and what we are doing next week in the conference.

The two proposals: a special EERA session and the VETNET network project

During the preparation of the ECER 2018 we (the VETNET network) prepared two proposals. Firstly, we proposed to have a specific EERA-wide session to promote awareness on the usaes of LTB for shaping ePosters in research conferences. Parallel to this we prepared a proposal for an EERA-funded “Network project” to be implemented by the VETNET network. Both proposals were linked to the idea to organise an interactive VETNET poster session in which the authors would presented their posters as ePosters within the VETNET programme. We were happy to see that the proposals were approved by the EERA authorities and that we could go ahead with the initiative.

The preparation of the VETNET pilot with ePosters

During the preparation phase the LTB developers prepared a special web page “FAQ ECER” in whch they gave all possible advice for the conference participants who had proposed posters for the ECER programme. With short instruction videos and with a well edited Webinar recording the authors were advised, how to enrich their original posters into ePosters by using the LTB.

Getting ready for the conference

During the last few weeks we have made the positive experience that all authors have been able to make use of the LTB and prepared their own ePosters. Now they are available on the page “EERA showcase“.

In addition, I have prepared my presentation for the EERA session (on the research background and usability of the LTB) also as an ePoster (or hybrid presentation) using the LTB. And furthermore, I have prepared my presentation “Transfer of Innovation after the Learning Layers” also as an ePoster (or hybrid presentation) with the help of LTB – or as we could call it in this context “the EERA-Toolbox”.

So, we have done quite a bit of work to bring the ePosters to the ECER 2018 and to demonstrate that the EERA could follow the example of other conference organisers. We are eagerly looking forward, how our pilot sessions will be received and what kind of feedback we will get from the authors and the audience. I will surely report on that in a short while.

More blogs to come …

Both last year and this year I had the privilege to participate in the International Vocational Education and Training (VET) conferences organised by Stockholm University in the beginning of May. These conferences have become already a tradition – the 2017 conference was already the sixth and this year it was already the seventh. The practical arrangements are also very special – the conference starts at noon in a the conference rooms of a cruise terminal. After the first sessions the whole conference boards on a ship and continues it work in the conference rooms of the ship. While we are working, the ship makes the trip through the Stockholm archipelago and finally stops at the port of Mariehamn (Maarianhamina) – on the Swedish-speaking island Åland (Ahvenenmaa) between Sweden and the Finnish mainland. In the morning the ship starts the journey back to Stockholm and the conference continues until the ship is getting near the port of Stockholm.

When looking back at the two cruise conferences in which I have participated, there was a clear difference to me regarding my personal life situation and in my work. In 2017 I had had a treatment of severe illness behind me and I was in the process of recovery. Also, we had just completed the EU-funded Learning Layers project (2012-2016) and finished the last reporting duties arising from the final review meeting (January 2017). So, when I prepared my contributions for the conference, I was still to a great degree working in a ‘reporting mode’ – describing the activities of the project and explaining the specific choices of the construction pilot and the accompanying research team of our institute ITB. And – although I have a background in the Nordic and European VET research cooperation – I was a ‘newcomer’ in this setting. So, I had to familiarise myself with this conference pattern in order to  learn as best I could from the other contributions.

Now, thinking the conference of this year, my situation was completely different. During the year that had passed by, I had been monitoring the follow-up initiatives of the Learning Layers’ Construction pilot (efforts to extend the scope of working with digital tools in organisational and individual learning contexts). Moreover, I had had the chance to revisit the theoretical and methodological roots of our approach that we had followed in the project. So, I had a chance to discuss the challenges of our innovation research in a transition phase – from the original project to the successor activities. And I had the chance to discuss, how our approach had built upon its predecessors but also, what new elements our context brought into discussion.

I will not try to give an overview, what all themes were covered in these conferences – that would go beyond the limits of blog articles. Instead, I am better off referring to the website of the conference organisers:

https://stockholminternationalvet.com/

This website provides information on the previous conferences as well as on the recent one. And – moreover – it provides links to the book publications based on the conference material. The book based on the 2017 conference was just published for the next conference. And the book based on the 2018 conference material will be produced even quicker – that is what we all hope. (In the meantime I will also publish updates on my ‘project’ spaces on the ResearchGate portal.)

What I want to emphasis in this context is the very specific atmosphere of these cruise conferences – they bring the participants from the Nordic circles, from the European circles and from the wider international circles closer to each other. Moreover, this conference has more intellectual flexibility to take on board interim reflections – not only finalised results and completed theoretical discourses. From that perspective it has gained an acknowledged position as a valuable ‘interim conference’ vis-à-vis the annual ECER conferences and the VET research program of the VETNET network.

However, having said that, I have to mention that for this reason the VETNET community had agreed on new conference schedules. Parallel to this Stockholm conference, we experienced the emergence of another similar ‘interim conference’ with similar features of bringing different circles of international and European VET researchers together. With this ‘other’ I refer to the “Crossing Boundaries in VET” conferences that were started in Bremen in 2015 and continued in Rostock in 2017. With these conferences the organisers had thought that the timing – one week before the annual ECER conference – would be helpful for the international participants. But this was no necessarily the case. Therefore, a mutual agreement was reached that the Stockholm conference will be organised from now on every two years and that in between the “Crossing Boundaries in VET” conference will be organised elsewhere in Europe.

So, after wrapping up my experiences with the Stockholm conference, I had to start working with the proposals for the next “Crossing Boundaries …” conference that will take place in May 2019. As the organisers of that conference want to deliver the proceedings already at the conference (and have managed to do this both times), the call for proposals was closed already at the end of May. So, to quote an old phrase: “After the conference is – before a conference”. Also in this respect, May 2018 was a busy month. But there were also other activities.

More blogs to come …

With my latest blog I started a series of blog posts with which I want to take further steps with the ongoing EU-funded TACCLE4-CPD project. Already in December I had posted of our kick-off meeting and shared some links to videos that presented the work of earlier TACCLE projects (that equipped teachers with capability to use digital tools and to create online content for their teaching). Now, the current TACCLE project – the fourth one – is focusing on continuing professional development (CPD). The partners from different countries focus also on different educational sectors (general education, adult education, vocational education and training (VET)). Moreover, the partners bring into the project different background experiences in introducing digital tools and web resources as well as enabling the practitioners to reach e-maturity in their own context.

In my previous post I gave a nutshell description, how our institute (Institut Technik & Bildung, ITB) positions itself in the project as the partner responsible for the field of VET. With this post I try to give an idea, how we worked in the predecessor project Learning Layers (LL), and how we have been able to build on the legacy of the project and its successor activities. In particular I will highlight the training activities and the piloting with the digital toolset – the Learning Toolbox (LTB).

The role of training campaigns in promoting e-maturity – the case of Bau-ABC

Initially the Learning Layers (LL) project was launched primarily as an ambitious co-design project – with a Europe-wide consortium and with multiple development agendas to be implemented in the pilot sectors Construction and Healthcare. The key impulses were given in the first Design Conference in Helsinki, in which also the idea of digitisation of training and learning materials of Bau-ABC was taken on board. However, in practice the co-design process turned out to be more complicated than expected (see below).

In the light of the above it was of vital importance for the Construction pilot that we started the Multimedia training activities in Bau-ABC at a relatively early phase – with a smaller number of pioneering trainers who volunteered to participate in training workshops that took place on Friday afternoons and Saturday mornings. In the first phase of these training sessions the participating trainers got an overview on the most important digital tools and enhanced their skills in producing and editing videos. For a short interim period they continued to engage themselves with digital media in Friday afternoon sessions. Then, at a crucial phase in the project work the trainers initiated a training scheme for the whole organisation – based on the idea of “Theme Rooms” to be visited in a series of workshops. This idea was put into practice at the end of the year 2015 as a joint effort of ITB researchers and the pioneering trainers. In the final phase of the project we knew that these training campaigns were of vital importance for the co-design process and for the pilot activities. Therefore, I produced already in 2016 a digital overview on the evolution of the training activities – using a moodle ‘course’ as the means of presenting the different phases and respective actions. Below I share the link to this moodle overview:

The “Theme Room” training in Bau-ABC Rostrup – from the origins to the implementation in 2015

(Please use the guest login to access the overview.)

Learning Toolbox – from digitisation of training materials to a flexible toolset with many applications

As has been mentioned above, the co-design process in the Construction pilot (and in particular in the Bau-ABC) started with the idea to digitise the training and learning materials – hitherto collected into the “White Folder”. However, after a rather short explorative phase, the process took a new course – to develop a digital toolset (that can be used with mobile devices) – the Learning Toolbox (LTB). Here, it is worthwhile to not that the explorative phase helped to put an emphasis on supporting workplace-based learning of the users. This process was carried out – parallel to the training campaigns – and completed with a viable product that the Bau-ABC trainers could use.  Primarily they presented working & learning tasks, share relevant knowledge resources and managed training-related communication. Parallel to this, the first applications were developed, in which LTB was used to support the coordination and management of construction work and related communication on a construction site.

Based on this founding phase, Bau-ABC has continued with its internal follow-up activities, whilst new challenges have come to picture in projects that extend the use of LTB to construction work in decentralised work organisations (and decentralised training and learning within continuing vocational training).

Moreover, a very different context for using LTB has been discovered in the conferences of former LL partners. In the Helsinki conference of the Association for Medical Education in Europe (AMEE) in 2017 the LTB was used to reshape the poster area and to shift the emphasis from paper posters to ePosters that were shaped with the LTB. In some other conferences in 2017 a different approach is introduced with a limited number of hybrid posters or hybrid presentations that are linked to LTB-stacks. In this way the use of LTB is spreading to other contexts.

For our present discussions in the TACCLE4-CPD project I have prepared a similar moodle-based overview on these developments. Below I share the link to this latter moodle overview:

Learning Toolbox (LTB) pilot and follow-up (2014 – …)

(Here again, please use the guest login to access the overview.)

—

I guess this is enough of the legacy we bring to the TACCLE4-CPD project from the predecessor project Learning Layers. In particular the latter overview shows that the Learning Toolbox (LTB) is not only viable but also transferable – in the original contexts and in new ones. Therefore, I have to keep my eyes open to see, what all we can learn from the transfer activities.

More blogs to come …

Last April (2017) I prepared for myself a ToDo list to prepare three conference papers with which I would revisit the experience of our EU-funded Learning Layers project (2012 – 2016) with emphasis on the achievements of the Construction pilot. I had the plan to participate in three conferences and I expected that I could prepare respectively three research papers that would examine from a conceptual point three important aspects of our project work

• the methodological issues on accompanying research (comparing our work with that of predecessors);
• the pedagogic foundations of our work (relating our starting points to current developments at policy level and in parallel pilots);
• the relevance of our work vis-à-vis industrial and organisational innovations (comparing our innovation agenda with its prior and emerging innovation concepts).

In October 2017 I wrote a blog in which I mentioned that intervening factors had slowed down my work. However, I was pleased to inform that I had managed to complete my ToDo list and produce three working papers to cover the themes that I had planned. Yet, after a short while I had to admit it to myself that I had celebrated my achievements too early. Indeed, I had covered the themes but the quality of the papers was uneven. In all papers I could see gaps that I had to cover. I had brought into picture essential elements of each ‘story’ but not all of the stories were woven together with a coherent argumentation. So, I understood that I have to rework all the papers from this perspective.  Now I have revisited the Learning Layers experience once again and completed the necessary reworking of these papers.

What do the (reworked) papers tell about our research in Learning Layers and on the growth of knowledge via our project?

Below I try to present the main contents of the newly reworked papers and highlight to red thread of the ‘story’ that is to followed through different sections. Here I want to draw attention on the conceptual and methodological foundations of our work in the Learning Layers as well as to the reflection on the predecessor concepts in the light of our work. Moreover, I will discuss some newer developments in innovation policies and innovation research as challenges for our approach.

Paper 1: Accompanying research between knowledge development and support for innovations in the field – Revisiting earlier innovation programmes as predecessors of the Learning Layers project

The first paper starts with the explanation, why the research team from our institute ITB declared itself as an  accompanying research (Begleitforschung) team in the Learning Layers’ Construction pilot. As a conceptual and methodological background for this approach the paper reconstructs the development of accompanying research in two parallel threads of innovation programmes in Germany:

• Innovation programmes for social shaping of work, technology and organisations (Humanisierung der Arbeit, Arbeit und Technik);
• Pilot projects and innovation programmes in the field of vocational education and training (Modellversuche, BLK-Programm “Neue Lernkonzepte in der dualen Berufsausbildung”).

Throughout these explorations the paper draws attention to different positions, whether the researchers should take a co-shaping role in innovation processes – and on shifts of emphasis in the course of time. Finally, the paper draws attention to specific positions that argue for more intensive and shaping-oriented involvement in terms of ‘action research’, smart innovation analyses and/or dialogical knowledge development. In the concluding reflections the paper compares the position of ITB researchers with the latter approaches.

Paper 2: Research as mediator between vocational learning, work process knowledge and conceptual innovation – on the role of research in the modernisation of vocational education and training (VET)

The second paper starts with recapitulating how the ITB researchers entered a participative co-design process with an open agenda and then supported the design idea – digitisation of training and learning processes in VET – with conceptual inputs. In the following sections the paper presents different conceptual reflections and insights into policy debates – to be followed by exemplary pilot projects that respond to the challenges raised in the debates. The relations between these sections can be characterised as follows:

• The contribution of Rauner (shaping-oriented VET) provides an interim synthesis of different concepts and themes that are essential for VET development. The empirical studies of Böhle (experiential knowledge) and Koch (mastery of complete work process) highlight the importance of their key concepts for advanced automation and future-oriented staff development.
• The contribution of Baethge et al. presents a negative scenario on renewability of VET and vocational learning culture during the transition to ‘knowledge society’. The contribution of Pfeiffer presents a critique of Baethge’s interpretation on ‘experiential knowledge’ and gives insights in complementary relations between academic and experiential knowledge in innovative organisations. The contribution of Spöttl deepens the analysis with his examination on to parallel educational genotypes (Bildungstypen) and on the relevance of hybrid types for the emerging innovation agenda ‘Industry 4.0’.
• In the light of the above-mentioned conceptual inputs and the debates on the sustainability of VET the selected pilot projects (and the example of Learning Layers) demonstrate, how shaping-oriented VET can be based on participative processes of practitioners. The exemplary cases demonstrated, how pilot projects have mobilised the participants in creating their own innovation agendas and implementation plans – and shaping the digital tools and web resources they need for themselves. Even, if these may have been modest starts, they have provided a basis for peer learning and peer tutoring – as social dynamics for innovation transfer.

Paper 3: Accompanying research as bridge-builder between digitisation and social shaping in workplace learning – Linking ‘work process knowledge’ and ‘smart innovations’ to ‘Industry 4.0’

The third paper examines the innovation agenda of the Learning Layers’ Construction pilot vis-à-vis industrial and organisational innovation research that takes into account the role of VET. In this context the following milestones and transitions are discussed:

• The starting point is the re-examination of the legacy of the European Work Process Knowledge network of the late 1990s. The paper gives a brief overview on the studies, the debates and the conclusions on the importance of VET.
• The next milestone is the re-examination of the German project “Smarte Innovation” that was completed in 2012. This project developed a more intensively participative approach to analyses of product life cycles and innovation potentials at different stations. The project also presented critical analyses of communication gaps, lack of understanding on innovation potentials in ‘remote’ stations and on the dysfunctional role of externally imposed process standards. Concerning the role of VET, the project drew attention to an emerging model for continuing vocational training (CVT) that outlined a new career progression model.
• The following milestone is the analysis of successive innovation programmes and the shift of emphasis from ‘remedial interventions’ (that compensate the negative consequences of mainstream innovations) to ‘enabling innovations’ (that seek to facilitate the development of ‘learning organisations’ into innovation leaders). As a contrast to the above-mentioned ones, the emerging innovation agenda ‘Industry 4.0’ shifts the emphasis to advanced automation, complex networking and new digitised production and service chains.
• The final milestone is the examination of the current discussion of social and educational scientists on the role of human actors in the context of ‘Industry 4.0’. Here, a number of researchers have brought together different conceptual and empirical studies that emphasise the potential of skilled workers and on the possibility to shape learning opportunities when developing new production or service concepts. Parallel to this, some researchers explore the possibilities to develop off-the-job learning opportunities as means to enhance workplace learning alongside the new production concepts.

– – –

I think this is enough of the contents papers and of the ‘stories’ that weave them together. As I see it, the Learning Layers’ Construction pilot may not have been at the forefront of industrial and organisational innovations or in the introduction of digital agendas to the field of VET. Yet, it has been clearly part of the big picture on all accounts and it has done its part to stimulate essential innovations in the field of VET. However, this leads us to another question: What can we say about transfer of innovations in the light of the Learning Layers project and its follow-up activities? To me, this is a subject to further studies to be reported later.

More blogs to come …

In my two previous blogs I have been developing a series of  posts that reflects on the Final Review of our EU-funded Learning Layers project (one year ago) and on the achievements of the follow-up activities. My first post focused on the review event and on the blogs with which I have documented the event and the follow during the year 2017. In my second post I summarised the current phase of the follow-up projects – in particular on further uses of the Learning Toolbox (the main result of Learning Layers’ Construction pilot). This reporting was based on a series of working meetings and conversations that we had last week with different partners. In the second post I discussed follow-up projects and initiatives with several partners involved. In addition, I brought forward the use of Learning Toolbox as support for conference presentations and posters (see the showcases) also in our field. In this third and concluding poster I will focus on the use of Learning Toolbox (LTB) in the training activities and related initiatives of the training centre Bau-ABC Rostrup. (As I have reported in my blogs in the years 2012-2017, Bau-ABC was the major application partner in the Learning Layers’ Construction pilot and the central venue for developing and testing the Learning Toolbox.) My report below is based on the information that Bau-ABC trainers shared with us in the working meeting last week.

Use of Learning Toolbox in the regular apprentice training activities

In the context of the Learning Layers project the LTB was developed to be used in the context of apprentices’ projects (normally of one week’s duration) during their stay in the training centre Bau-ABC. At that time the LTB was introduced and tested in a few training occupations (and the results were discussed in evaluation workshops and in interviews with the trainers). Now we were interested to find out, how the Learning Toolbox is being used after the project period.

Lothar Schoka, trainer for the occupations in well-building and borehole building (Brunnenbau, Spezialtiefbau) informed us on the use LTB in his area. It appeared that the use of LTB had become everyday practice in their projects. The information is available in the trade-specific stack, the apprentices get quickly used to working with the toolset and they can combine the work with their mobile devices and work in the computer class. Thus, the use of LTB is a sustainable outcome of the Learning Layers project.

Use of Learning Toolbox for the transversal theme ‘health and safety’

Another arena for working with the LTB has been the transversal theme ‘health and safety’ (Arbeitssicherheit und Gesundheitsschutz). In Spring 2017 a working group of Bau-ABC trainers started to discuss the possibility to use digital tools to support training and learning in this field. At that time I had a chance to accompany and support the start of the working group. After the summer holidays the working group continued with regular meetings and concentrated on using the LTB. Now, trainer Thomas Weerts (the shop steward for health and safety in Bau-ABC) reported on the current phase of the work. The trainers involved in the work had agreed on common content structures for ‘health and safety’ to be covered in their trade-specific stacks for LTB. Thomas himself is developing the ‘mother stack’ for the theme ‘health and safety’ that guides the users to groups of trades and to specific trades. (This ‘mother stack’ will also provide a template for the trades that are still developing their own stacks.)

Use of Learning Toolbox in the project “Workcamp GreenHouse”

A further arena for using the LTB was presented by the trainer Markus Pape (responsible for training carpenters). He is currently working in a nation-wide project “workcamp GreenHouse” that has been launched by several training centres in the construction sector. The project is building exhibition areas and items to demonstrate ecological/sustainable solutions in building houses (with emphasis on energy-efficiency, ecological isolation materials etc.). Altogether, the project is shaping a wide range of modules to introduce these principles in the training for construction sector. In the meeting he presented an overview on the modules and explained, what modules would be suitable for piloting with the LTB. For this purpose he invited the LTB developers to prepare a proposal to be introduced to the project consortium.

Use of Learning Toolbox to support language learning alongside apprentice training

A further arena for working with the LTB is the support for language learning for non-native speakers alongside apprentice training. During the Learning Layers project this area was already explored in a workshop with several Spanish apprentices who were having their training in Bau-ABC. In the meantime a separate working group in Bau-ABC had been developing this idea further. Melanie Campbell (as a coordinator of the related Mobipro-EU project) presented a plan for shaping the LTB stacks that support general orientation (blue tiles), trade-specific vocabulary (green tiles) and communication skills (red tiles). We discussed this plan together with her, the trainers and a supporting language teacher. The developers of Learning Toolbox came up with proposals, how to introduce elements of gamification and motivational support for learners.

– – –

I guess this is enough for an overview. To me this was an important update since I am trying to link cooperation with these initiatives to my participation in our new EU-funded project (TACCLE4 – CPD). In this project we are supporting the training of teachers and trainers in using digital tools and in shaping digital contents for learners. As I see it, the LTB can play a major role in promoting these activities in the field of vocational education and training (VET). But, to be sure, I need to explore this prospect deeper and have more meetings with Bau-ABC trainers.

More blogs to come …